This is a very nice micro servo. Its strength and speed vs weight is unparalleled by any other micro servo I've found. The output shaft is free to turn 360 degrees but the controller will only rotate it about +/- 50 degrees. I was hoping it would achieve +/- 90 to be used on a robot. I connected it to an Arduino and used the writeMicroseconds command to try out of range values and it still only turns +/- 50 degrees. I disassembled one to check the construction quality. All the gears are metal and there are two ball bearings supporting the output shaft. The potentiometer was 1800 ohms with a 2.5V reference voltage and over 180 deg of useable rotation. In theory this digital servo should be programmable to modify the angular limits but I couldn't find any documentation. There are 4 SOT23 transistors on the circuit board that appear to be a full discrete H-Bridge driving the motor. The control horns felt a little loose and the spline would occasionally slip if stalled. The midsection of the housing does appear to be made of some kind of metal. I was able to solvent weld a small piece of ABS to the bottom plate using acetone so the top and bottom plates are likely made of ABS. I really like this servo and would buy many more if there was a way to increase the rotation angle.

This is a very nice micro servo. Its strength and speed vs weight is unparalleled by any other micro servo I've found. The output shaft is free to turn 360 degrees but the controller will only rotate it about +/- 50 degrees. I was hoping it would achieve +/- 90 to be used on a robot. I connected it to an Arduino and used the writeMicroseconds command to try out of range values and it still only turns +/- 50 degrees. I disassembled one to check the construction quality. All the gears are metal and there are two ball bearings supporting the output shaft. The potentiometer was 1800 ohms with a 2.5V reference voltage and over 180 deg of useable rotation. In theory this digital servo should be programmable to modify the angular limits but I couldn't find any documentation. There are 4 SOT23 transistors on the circuit board that appear to be a full discrete H-Bridge driving the motor. The control horns felt a little loose and the spline would occasionally slip if stalled. The midsection of the housing does appear to be made of some kind of metal. I was able to solvent weld a small piece of ABS to the bottom plate using acetone so the top and bottom plates are likely made of ABS. I really like this servo and would buy many more if there was a way to increase the rotation angle.

This is a very nice micro servo. Its strength and speed vs weight is unparalleled by any other micro servo I've found. The output shaft is free to turn 360 degrees but the controller will only rotate it about +/- 50 degrees. I was hoping it would achieve +/- 90 to be used on a robot. I connected it to an Arduino and used the writeMicroseconds command to try out of range values and it still only turns +/- 50 degrees. I disassembled one to check the construction quality. All the gears are metal and there are two ball bearings supporting the output shaft. The potentiometer was 1800 ohms with a 2.5V reference voltage and over 180 deg of useable rotation. In theory this digital servo should be programmable to modify the angular limits but I couldn't find any documentation. There are 4 SOT23 transistors on the circuit board that appear to be a full discrete H-Bridge driving the motor. The control horns felt a little loose and the spline would occasionally slip if stalled. The midsection of the housing does appear to be made of some kind of metal. I was able to solvent weld a small piece of ABS to the bottom plate using acetone so the top and bottom plates are likely made of ABS. I really like this servo and would buy many more if there was a way to increase the rotation angle.

using them as cyclic servo and tail servo for copter x 250 . buy with confindence

using them as cyclic servo and tail servo for copter x 250 . buy with confindence

using them as cyclic servo and tail servo for copter x 250 . buy with confindence

価格のために、あなたは何もより良いを得ることができません!!!

For the price you can't get anything better!!!

価格のために、あなたは何もより良いを得ることができません!!!

屋外の泡立て機用にこれらのサーボを注文しました。 D0576HTは、デジタルグラムスケールで測定したサーボアームとセンタースクリューなしの8.2gです。 7.9gと記載されていますが、私は2個を計量して8.2gを得ました。 サーボアームが付属しており、そのうちの1つが余計に長かったことに驚きました。 3Dフォームにフィットします。 InservosのD074には、長いサーボアームが付属していないため、フェノールホーンの拡張が必要でした。 素晴らしい仕事BlueArrow。 LiFeの6.6Vバッテリで電源を入れ、動作しているかどうかを確認します。 私の最初の発見は、D0576HTは非常に速く、D0474よりも速く、よく集中しています。 トルクスペックは印象的で、3D平面にこれらのサーボを取り付けるのが待ちきれない。

I ordered these servos for my outdoor foamy airplanes. The D0576HT weighs 8.2 g without servo arm and center screw measured on a digital gram scale. It is listed as 7.9g but I tried weighing 2 pcs and got 8.2g. The servo comes with an assortment of servo arms and I was pleasantly surprised that one of them was extra long. Fit for a 3d foamy. I used to have to make phenolic horn extensions as the D074 from Inservos didn't come with the long servo arm. Nice job BlueArrow. I powered it up with a LiFe 6.6V battery to check if it was working. No problems. My initial findings are the D0576HT is very fast, faster than the D0474 and centered well. Torque specs are impressive and I can't wait to install these servos in my 3d plane.

屋外の泡立て機用にこれらのサーボを注文しました。 D0576HTは、デジタルグラムスケールで測定したサーボアームとセンタースクリューなしの8.2gです。 7.9gと記載されていますが、私は2個を計量して8.2gを得ました。 サーボアームが付属しており、そのうちの1つが余計に長かったことに驚きました。 3Dフォームにフィットします。 InservosのD074には、長いサーボアームが付属していないため、フェノールホーンの拡張が必要でした。 素晴らしい仕事BlueArrow。 LiFeの6.6Vバッテリで電源を入れ、動作しているかどうかを確認します。 私の最初の発見は、D0576HTは非常に速く、D0474よりも速く、よく集中しています。 トルクスペックは印象的で、3D平面にこれらのサーボを取り付けるのが待ちきれない。

これらのサーボは強力で、超高速の超強力で、よく作られて、しばらくすると若干の弛みがあり、ほとんど目立たない、推奨される

those servos are mighty ,super fast super strong,well made ,they have some slack after a while ,barely noticeable ,suggested

これらのサーボは強力で、超高速の超強力で、よく作られて、しばらくすると若干の弛みがあり、ほとんど目立たない、推奨される

二度とバングッドから買わない、デリバリーリアルスーパー、スーパーロング、本当に入浴しない、これは注文後、すでに別の店から買って、前に来たので、それがうまくいくかどうかテストする

i will never buy from banggood again, delivery real super, super long, im not really bather to test if it works because i already bought it from another store way after i order this and it came way before

二度とバングッドから買わない、デリバリーリアルスーパー、スーパーロング、本当に入浴しない、これは注文後、すでに別の店から買って、前に来たので、それがうまくいくかどうかテストする

優れたサーボ超精密、完璧なセンタリング、豊富なパワー

Excellent servo super precise, perfect centering and plenty of power

優れたサーボ超精密、完璧なセンタリング、豊富なパワー

優れた召使い

ottimi servi

優れた召使い

gute Qualität guter Preis

gute Qualität guter Preis

gute Qualität guter Preis

Kleine Abmessungen alles bestens und auch für den HV Betrieb.

Kleine Abmessungen alles bestens und auch für den HV Betrieb.

Kleine Abmessungen alles bestens und auch für den HV Betrieb.